![[Brand] [Model] 22 kW AC wallbox charger, front view](/_astro/ph-1x1-b.D63u70vq_ZaQKi6.jpg)
![Close-up of the Type 2 socket and status light on the [Brand] [Model] 22 kW wallbox](/_astro/ph-1x1-c.fBeEHrH-_ZhaPw0.jpg)
![[Brand] [Model] 22 kW wallbox mounted beside a carport in a Pretoria East estate](/_astro/ph-1x1-a.B_y-El6F_Z1uGB7E.jpg)
Home EV chargers
A three-phase wallbox for homes and small businesses that have the supply to charge quicker, with a universal Type 2 socket and RFID or app access.
[Price on request]
Supplied with installation, commissioning and a Certificate of Compliance. We confirm your price after a quick site assessment.
Prefer to call? +27 [XX XXX XXXX]
The [Brand] [Model] 22 kW AC is for properties that already have three-phase power, or plan to get it. On a three-phase supply it can charge a compatible car roughly three times faster than a single-phase wallbox, which helps households with two EVs, long daily commutes or short turnarounds between trips.
The Type 2 socket makes it a flexible choice. Visitors and family members can plug in with their own cables, and there is no cable hanging on the wall. RFID cards let you control who charges, which is useful on a small business premises or a shared driveway. It also fits well in a workplace charging set-up where a few bays need faster top-ups.
Before choosing it, check two things: your supply and your car. If either is limited to single-phase or 7 kW, the 7.4 kW model does the same job for less. Our charger sizing tool helps you work it out, and the full range is listed under home EV chargers.
We start with a site assessment to confirm the three-phase supply, the spare capacity at your DB board and the cable route. A registered electrician then installs a dedicated three-phase circuit with suitable protection, mounts the charger on a wall or pedestal, and tests the installation before issuing a Certificate of Compliance. Outdoor installs get a weather-appropriate mounting position and, where the cable is exposed, suitable conduit or armoured cable.
If your property is single-phase today, a three-phase upgrade involves an application to Eskom or your municipality and can take time. We explain the process and costs up front. The scope of a standard job is on our installation service page.
Tap an RFID card or start a session in the app. You can set schedules, cap the charging current and review energy use per session, which helps if you want to separate business and personal charging.
Because the unit has an RFID reader, you can issue cards to family members, staff or tenants and see who charged and when. Firmware updates arrive over the air, and the OCPP connection means the charger can later join a management platform if your needs grow.
Technical data
Values in brackets are placeholders until confirmed against the manufacturer's datasheet.
| Rated output power | [22 kW] |
|---|---|
| Max current (adjustable) | [6–32 A per phase] |
| Supply phases | [Three-phase (single-phase capable)] |
| Input voltage | [400 V AC] |
| Frequency | [50 Hz] |
| Connector type | [Type 2 socket, with shutter] |
|---|---|
| Cable length | [Cable not included] |
| Number of outlets | [1] |
| Connectivity | [Wi-Fi / Ethernet / 4G optional] |
|---|---|
| Protocol | [OCPP 1.6J] |
| Authorisation | [RFID / app] |
| Dynamic load management | [Yes] |
| Solar / PV-surplus charging | [Yes, TBC from datasheet] |
| Scheduling | [Yes, via app] |
| Residual current detection | [6 mA DC detection] |
|---|---|
| Protection | [Over-/under-voltage, over-current, earth fault] |
| Supported earthing systems | [TN-S / TN-C-S / TT, TBC] |
| Enclosure rating | [IP55] |
|---|---|
| Impact rating | [IK10] |
| Dimensions (H×W×D) | [TBC from datasheet] |
| Weight | [TBC from datasheet] |
| Mounting | [Wall / pedestal] |
| Operating temperature | [-30 °C to +50 °C] |
| Standards | [IEC 61851-1, IEC 62196-2, TBC] |
|---|---|
| Metering | [TBC from datasheet] |
| Warranty | [X years] |
Use cases
Supply, installation and commissioning of a home wallbox charger, with a Certificate of Compliance on every job.
Shared AC charging for offices, business parks and campuses, with access control, usage reports and load management.
EV chargers that work with solar PV, inverters and batteries, sized honestly for your system.
Installation
Every site is different, so we confirm the scope after a site assessment. This is what to expect.
Datasheet
Installation manual
Chargers
[Brand]
A compact single-phase wallbox with a tethered Type 2 cable, app scheduling and load management, made for overnight charging at home.
[Brand]
A networked dual-socket AC charger that serves two bays from one unit, with OCPP, RFID access, per-socket metering and load management for shared sites.
Only if its onboard charger accepts 22 kW AC, and many cars accept 11 kW or less. The charger delivers whatever the car can take, so it is still useful, but check your car's specification before paying for the extra capacity.
It will work on single-phase, but at about 7 kW. Unless you plan to upgrade your supply, the 7.4 kW model is the better value.
Yes. This is a socket model, so you use a Type 2 cable. We can supply one to match your car; see our accessories.
Yes. Load management balances the charger against the rest of the property, and several units can share a supply when linked to a management platform.
Slightly. The circuit is three-phase and the cable is larger, so DB board capacity and cable distance matter more. We confirm both during the site assessment.
Talk to StrataCharge
Tell us about your site and the vehicles you need to charge. We reply to messages within one business day.